Page 1 of 1
Fox fork spacer travel adjustment??????????
Posted: Wed Apr 07, 2010 12:22 pm
by Allan
Just recently in either MBR of WMB magazine there was a workshop article showing how to reduce the travel of a F series or Float series fork by fitting fox spacers.
Has anybody got this article or does anybody know of a walk through link on'tinternet?
Allan
Posted: Wed Apr 07, 2010 1:00 pm
by Tullio
http://service.foxracingshox.com/consumers/index.htm
There's a menu option for instructions on 32mm Travel Adjust. It's actually a lot easier to do than they describe....so long as you kept all the spacers that came with the forks.
Why you selling the Blur?
Posted: Wed Apr 07, 2010 1:35 pm
by Allan
The forks will be the new F120 rlc qr15 and I want to space them down to 100mm travel so that I can go back to 120mm if I need to.
Just swapping the blur out for something with similar geometry but shorter travel. Had the blur over two years now and just fancy a change.
Posted: Wed Apr 07, 2010 1:43 pm
by Tullio
You'll need;
26mm socket
10mm socket
Spacers (you should have 2 in the box with the forks)
Torque wrench
Fox Fluid
Suspension Oil (whichever weight you're using)
Syringe is handy too or a small measuring pot to measure the new fluid.
The instructions will tell you to install new crush washers but you can get away with re-suing the old ones.